Playback; Playing Discs Or Files; Forward And Reverse Scanning; Playing Specific Chapters, Tracks Or Files - Pioneer UDP-LX500 Manual De Instrucciones

Ocultar thumbs Ver también para UDP-LX500:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Chapter 4

Playback

Playing discs or files

This section describes the player's main
operations.
For the types of discs and files that can be played,
see page 8. Video, image and audio files recorded
on discs are played with the Source function
(page 35).
1
Press ^ STANDBY/ON to turn on the power.
Turn the TV's power on and switch its input
beforehand.
2
Press ; OPEN/CLOSE to open the disc tray and
load the disc.
Note
• Load the disc with the printed side facing up.
• Several dozen seconds are required to read the
disc. Once reading is completed, the type of
disc is displayed on the player's front panel
display.
• When a BD with usage restrictions set by a BD
recorder is loaded, the PIN code input screen
appears. In this case, input your PIN code.
3
Press q/h to play the disc.
• To pause, press q/h during playback.
• To stop, press g during playback.
Note
• Some discs start playing automatically when
the disc tray is closed.
• BD-ROM/DVD-Video discs have parental lock
features. Input the password registered in the
player's settings to unlock the parental lock.
For details, see page 46.
• Some BD-R/-RE discs have playback
protection. To cancel the protection, input the
password set for the disc.
• If the picture and sound are not properly
output, Troubleshooting on page 52.
❖ If the disc menu is displayed
For some discs, the disc menu is displayed
automatically when playback starts. The contents
of the disc menu and the way to operate depend
on the disc.
❖ Resuming playback from where it
was stopped (resume playback
function)
• When g is pressed during playback, the point
at which the disc stopped is stored in the
memory. When q/h is pressed after that,
playback resumes from that point.
• To cancel the resume playback function, press
g while playback is stopped.
Note
• The resume playback function is canceled
automatically in the following cases:
– When the disc tray is opened.
– When the file list window is switched.
– When the power is turned off. (For BDs and
DVDs this does not cancel the resume
playback function.)
• When you want to continue playback from a
position you specify to be played next time, see
Continuing playback from a specified position
(Continued Viewing Playback) on page 34.
• The resume playback function cannot be used
for some discs.
Forward and reverse
scanning
 During playback, press t or y.
• The scanning speed switches each time the
button is pressed. The speed steps depend on
the disc or file (the speed is displayed on the
TV screen).
❖ To resume normal playback
 Press q/h.
Playing specific chapters,
tracks or files
 During playback, input the number of the
chapter/track/file you want to select.
• Use the number buttons (0 to 9) to input the
number, then press ENTER.
• Press CLEAR to clear the values you have input.
04
27
En

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido