Switching The Subtitles; Using The Direct Function; Moving Subtitles; Switching The Audio - Pioneer UDP-LX500 Manual De Instrucciones

Switching the subtitles

04
For discs or files on which multiple subtitles are
recorded, the subtitles can be switched during
playback.
Caution
• The subtitles cannot be switched for discs
recorded by a DVD or BD recorder. Also refer
to the operating instructions for the device
used for recording.
 During playback, press SUBTITLE.
• The current subtitle and total number of
recorded subtitles are displayed on the TV
screen.
To switch the subtitle, press SUBTITLE again.
• The subtitles can also be switched by selecting
Subtitle from the FUNCTION menu.
• If the subtitles are not switched when
SUBTITLE is pressed, switch them from the disc
menu screen.
❖ Turning the subtitles off
 Press SUBTITLE several times or select Subtitle
from the FUNCTION menu to switch the setting to
Off.

Using the DIRECT function

When the DIRECT function is turned on, the digital
audio output and video output are blocked and
analog audio is played back with high quality. This
function is turned Off upon shipping.
 Press DIRECT.
• The current setting (ON or OFF) is displayed
on the player's front panel display. To switch
the setting, press DIRECT again.
• When the DIRECT function is turned on, the
DIRECT indicator on the main unit turns on.
Note
• When you turn on the DIRECT function and
play, the output volume may be low depending
on the settings of this device and contents
being played.
• Depending on disk or file, DIRECT function will
not work in some cases if playback is not
stopped (resume playback function is in
cancelled state). To cancel the resume
playback function, press g while playback is
stopped.
30
En

Moving subtitles

The position of the subtitles displayed while
playing BD-ROMs or DVDs can be moved.
1 Play the BD-ROM or DVD video and display the
subtitles on the TV screen.
2 Press and hold the SUBTITLE button for at least
2 seconds.
• The Subtitle shift mode is set.
• [Subtitle shift mode] is displayed on the TV
screen.
3 Use the / buttons to move the position of the
subtitles.
• Use the / buttons to move the position of
the subtitles.
• Once the setting is complete, press ENTER.
4 Cancel the Subtitle shift mode.
Press the ENTER button.

Switching the audio

For discs or files on which multiple audio streams/
channels are recorded, audio streams/channels
can be switched during playback.
 During playback, press AUDIO.
• The current audio and total number of
recorded audio streams are displayed on the
TV screen.
To switch the audio, press AUDIO again.
• The audio can also be switched by selecting
Audio from the FUNCTION menu.
• If the audio is not switched when AUDIO is
pressed, switch it from the disc menu screen.
Switching the CD/SACD
playback area
1 In the stop mode, press CD/SACD.
• The current playback area setting is displayed
on the player's front panel display. To switch
the playback area, press CD/SACD again.
[CD AREA]  [SACD 2CH]  [SACD MCH] 
(back to beginning)
• During playback, press g twice to cancel
continuous play before selecting the playback
area.