Changing the Video options
There are a number of additional picture settings
you can make using the Video Parameter menu.
Note
• It is not possible to open the Video Parameter screen when any of the Home Menu (Source, Initial
Setup), Audio Parameter, Function Menu, or Disc Menu is being displayed.
• Video Parameter settings have no effect during Dolby Vision output.
• The Video Parameter option is not effective when the HDMI Mode is set to Pure Audio.
• During playback of 4K content, no effect is produced by the DNR setting.
• In Options, the factory default settings are indicated in bold.
Setting
Memory
TV Types
Brightness
Contrast
Hue
Chroma Level
Sharpness
DNR
HDR-SDR Adj.
Options
Explanation
Your preferred settings can be stored in Memory1, Memory2 or
Memory 1
Memory3 to use the settings of the Video Parameter function
Memory 2
according to the disc or type of connected video device.
Memory 3
Reference
Images are output with the screen quality appropriate for the selected
type of video device.
LCD TV
•Reference is a setting to suppress video signal processing. Select this
OLED TV
when viewing video with the original material unchanged.
Projector
-10 - 0 - 10
Select this to adjust the TV screen brightness.
-10 - 0 - 10
Select this to adjust the TV screen contrast.
-10 - 0 - 10
Select this to adjust the color (green and red) balance of the TV
screen.
-10 - 0 - 10
Adjusts the density of the colors.
0 - 16
Adjusts the sharpness of the images.
0 - 3
Reduces the noise.
100 - 300 - 700
Use this item to perform the HDR-SDR conversion according to the
connected video device. This adjusts the connected video device to
the maximum brightness value.
Operating the Video
Parameter screen
1
Press VIDEO P. to display the Video Parameter
screen.
2
Use
/
to select the setting you want to
adjust, then press ENTER.
3
Use
/
to set as necessary, then press
ENTER.
❖ Closing the Video Parameter
screen
Press VIDEO P. or
RETURN.
06
39
En