Installing The Camcorder To The Marine Pack - Sony MPK-DVF3 Manual De Instrucciones

Installing the camcorder to the marine pack

1
Install the camcorder to the marine pack.
For DCR-TRV7E
Connect the monitor plug.
1 Remove the monitor cord hook.
2 Connect the monitor plug to the
AUDIO/VIDEO jack of the
camcorder.
Connect the remote plug and the
microphone plug.
3 Connect the microphone plug to
the MIC jack (plug in power).
4 Connect the remote plug to the
LANC control jack.
For DCR-TRV9E/TRV10E/TRV20E/TRV900E
Connect the remote plug and the
microphone plug.
1 Connect the microphone plug to
the MIC jack (plug in power).
2 Connect the remote plug to the
LANC control jack.
monitor cord hook
Slide through, then pull
outward.
Note
To prevent the cords from twisting or slacking,
make sure that these plugs are inserted in the
direction indicated in the illustration.
to the LANC
rear shell
to the AUDIO/VIDEO
jack
to the LANC
control jack
front shell
to the MIC jack
(plug in power)
control jack
GB
front shell
to the MIC
jack
(plug in
power)
continued
11
-GB