Audiolab LIVE 16XL Manual De Usuario página 11

Control
7. Assign/Channel button
Press this button twice, it will switch between Assign and
Channel function.
Press this button to enter assign page, signal from a selected
input channel can
be assigned to Main, AUX1-4, Sub1-4 or AUX5-8 and FX1-2.
The window is as below. For the detail operation, please refer
to introduction in section 6.
Channel
Press this button again, you will see Channel page on LCD
screen. It gives you a preview of other function such as Polar-
ity, Delay, Link, Assign, Gate, EQ, Compressor etc.
You can also adjust corresponding parameters that show on
the screen. But for Gate here, you can only adjust threshold;
For Compressor, you can only adjust threshold; For EQ, you
can adjust nothing here.
For the detail operation, please refer to introduction in sec-
tion 6.
LIVE 16XL
ENGLISH VERSION
p. 11