Audiolab LIVE 16XL Manual De Usuario página 26

DSP Control
6. DSP Control
The DSP control part is the most important part of LIVE 16XL.
In this part you can adjust Gate, Compressor, EQ, polarity,
panning, delay, link, routing, etc. for the selected channel.
Here is the table lists each input/output channel that with
DSP function.
Touch a channel, for example, CH01, the background and cor-
responding CH1 button will illuminate synchronously, you can
control the output signal level by Parameter Adjust knob. S will
illuminate synchronized with Solo button on the panel.
M will illuminate synchronized with Mute button on the panel.
Meter beside the fader indicates the input signal level activity.
This long fader can control level of all input
and output channels in this screen, but for
one selected channel at one time, all its con-
trol will change synchronized with the select-
ed channel.
Slide the fader, you can increase or decrease
corresponding channel's level.
Meter beside the fader indicates signal activity.
The number indicates current channel level.
The pan icon shows real pan of selected chan-
nel audio signal, press Pan button on the panel
and rotate Parameter Adjust knob to adjust it.
Touch the icon to monitor selected channel
audio signal, it will illuminate synchronized
with Solo button on the panel.
Touch the icon to silence selected channel
audio signal, it will illuminate synchronized
with Mute button on the panel.
This letter shows the real current channel.
You can also rename the channel. Touch it
and hold for a while, a virtual key will come
into your vision, as below picture show. Now
please tap the keyboard and give a new name
to this channel as you like.