Audiolab LIVE 16XL Manual De Usuario página 7

Control
5.1 Function buttons and knobs
1. Main input channel select buttons
There are 18 select buttons Ch1-20 as you can see on the panel.
Press this button will route its channel to add DSP setting
and assign its output. It will illuminate as has been pressed
and enabled. In DCA window, you can select group channels
by this button.
2. Main input channel knobs
The knob Ch1-16 control the gain level of the channel's input.
Note: It is very important to properly set the level of the input
gain to minimize noise and avoid overload distortion.
The knob Ch17-20 control input level of the channels.
3. Main input signal clip indication
These LEDs beside input channel knobs indicate the input
level of Channel1-20.
4. LED meters
The LED meters show the signal status, including the output
level.
LIVE 16XL
ENGLISH VERSION
p. 7