Audiolab LIVE 16XL Manual De Usuario página 41

DSP Control
Press one of DCA1-6 on the panel or touch it on the screen,
the button will illuminate, which means now you can select
one or several channels to the group as above window.
Text under DCA1-6 controls show the preset of DCA settings,
you can load a preset directly by pressing Load button, for
the detail operation, please refer to the DSP Load section.
Touch channels that you want to assign to...DCA2, for exam-
ple. The selected channels background will illuminate.
After you selected channels, the DCA Set control is flash,
now press it on screen to save the group. Repeat the same
way to assign other groups. Each group can repeat select-
ing any channel. For example, channel 3 can be assigned to
DCA1, DCA2, etc. After selecting, the page will return to Mixer
mode automatically, in which page you can operate selected
group. You can slide fader on the left of screen to increase or
decrease the channel fader levels (not volume) in proportion
at the same time, or by rotating the corresponding knob to
control the level.
Press DCA clear, you can see indication on the screen, a warn-
ing will come up, then select "yes" to clear channels that as-
signed to current group.
Touch these icons to enter corresponding page.
LIVE 16XL
ENGLISH VERSION
p. 41