Audiolab LIVE 16XL Manual De Usuario página 18

Control
21. DCA1-6 buttons
Press these buttons to select which channels you want to be
assigned to the group.
22. AUX1-4 select buttons
This button function is similar to input channel select but-
tons. Press this button will route its channel to add DSP
setting and assign its output. It will illuminate as has been
pressed and enabled. In DCA window, you can select group
channels by this button.
23. FX1-2 select buttons
This button function is also similar to input channel select
buttons and AUX1-4 select buttons. For the details, please re-
fer to point 22 or 1.
24. AUX-FX Mode button
Press this button, it will illuminate as has been enabled. Sig-
nal from 20 main input channels will be assigned to AUX1-4
or AUX5-8(SUB1-4) and FX1-2, you can rotate the Parameter
Adjust knob to adjust signal's level. When the button is OFF,
it is AUX/FX Out function, which means the AUX1-8 and FX1-2
will not enabled in Assign status.
25. Meters button
Press this button to enter meters check page, as below pic-
ture show, for the details, please refer to corresponding in-
troduction in section 6.
LIVE 16XL
ENGLISH VERSION
p. 18