Audiolab LIVE 16XL Manual De Usuario página 37

DSP Control
This is a high-pass filter. It can pass higher frequencies. When
set to its lowest position, the filter is off. Type indicates the
filter's type that you selected, different type means different
shape and different filter frequency range.
This is a low-pass filter. It can pass lower frequencies. When
set to its highest position, the filter is off. Type indicates the
filter's type that you selected, different type means different
shape and different filter frequency range.
6.8 FX1-2 interface
The setting values of FX1-2 can be saved as preset for future
use by simply touching the Save button and following the in-
struction that is shown on the LCD display.
Touch anyone of these controls to adjust parameter of the
effects by rotating Parameter Adjust knob or slide fader on
the right of LCD screen.
LIVE 16XL
ENGLISH VERSION
Touch EQ1 to set its Frequency, Q and Gain parameters sepa-
rately, touch Type to change the filter to high-pass, low-pass
or band-pass filter, the same as EQ2, EQ3 and EQ4. You can
see the waveform on the screen.
Note: you can also rename the selected channel by long
pressing CHXX.
Touch this control to mute current FX effect.
p. 37