Audiolab LIVE 16XL Manual De Usuario página 22

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Control
28. UP &Left &Down &Right button
These buttons move the cursor around the display page, or
select and delete parameters and options. Sometimes, Up
button function is the same as Left button, while Down but-
ton function is the same as Right button. But in GEQ, Up and
Down adjust gain level, while Left and Right adjust frequency.
As the function of this button will be a little bit different in
different function, please notice the notes that are shown on
the screen when operating.
29. Parameter Adjust knob
This Encoder adjusts the parameter values of selected con-
trol that are shown on the LCD display. Turning it clockwise
increases the value and counterclockwise decreases the val-
ue. As the function of this button will be a little bit different in
different function, please notice the notes that are shown on
the screen when operating.
30. Flat button
Press this button, you can see warning on the screen, select
yes to return all the settings to default, only in the page that
you can set some values can this button function, such as
Gate, EQ, Comp and GEQ. As the function of this button will
be a little bit different in different function, please notice the
notes that are shown on the screen when operating.
31. Enter(TAP) button
This button can activate as two types of function.
Enter: Confirm the edited parameter values.When there is a
confirmation message jump out on the screen, press Enter
button to answer "yes".
TAP: In the FX1 and FX2 page, it will switch to TAP function,
you can use this button to enter a delay time in tempo with
the music being played. As the function of this button will be
a little bit different in different function, please notice the
notes that are shown on the screen when operating.
32. Control Room knob
This knob controls the overall output level for control room.
33. PFL button
The default setting for the Solo bus is After-Fader Listen (AFL);
by pressing PFL, Pre-Fader Listening is enabled. In either mode,
press Solo on any channel or bus to route that channel to the
Solo bus and has no effect on the main or subgroup mixes.
LIVE 16XL
ENGLISH VERSION
34. HP1-2 knob
These knobs control the overall output level for headphones.
35. GEQ
This button is the same as EQ when you press it twice, please
refer to point 9 for basic introduction.
36. Main control knob
This knob here controls the overall output level for main channel.
p. 22

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido