Audiolab LIVE 16XL Manual De Usuario página 30

DSP Control
Touch pan left or right to change signal's balance effect, it
can be adjusted by Parameter Adjust knob on the panel when
pan button is on.
If you have adjusted a channel pan, please just touch 2 times
on the screen and make it back to the centre position. For the
details please refer to the Pan introduction in section 5.
These icons indicates which DCA group does current chan-
nel been grouped. For example, if current channel has been
grouped to DCA1 and DCA4, the background of DCA1 and
DCA4 will illuminate.
When switch Sub1-4 mode to AUX 5-8 mode, the correspond-
ing page is as below picture show, this function enable out-
put assignments to be more.
LIVE 16XL
ENGLISH VERSION
Touch anyone of these controls to enter corresponding page.
Touch it, the background and Link button will illuminate syn-
chronously, and current channel will link to its pair channel,
the button will illuminate then.
Touch Select icon here, all input channels will display to you.
Please follow the indication on the LCD screen to operate. For
different input channels, the function and output assign-
ments are different, please notice indication on the screen.
p. 30