Audiolab LIVE 16XL Manual De Usuario página 45

DSP Control
Touch this icon to select solo mode to be PFL or not, it will
illuminate synchronously with PFL button once enabled. For
the detail of PFL, please refer to corresponding introduction
in section 5.
Default setting restores all the settings you have made to de
fault.
This icon determines the page display to you when you turn
on the mixer. Touch Long Fader, you will see Long Fader page
first, while select Mixer Mode will show you Mixer page first.
At the lower right corner, you can see instruction of the DSP
firmware.
Touch this icon to switch between SUB1-4 mode and mode,
please note messages on the screen when operation. For the
detail function of this button, please refer to Assign introduc-
tion in section 6.3.
Touch this button to lock the system. Once locked, you must
input your password to unlock it. Default password is "1111".
Master password is "LIVE", which means you can tap it to un-
lock your LIVE 16XL every time you forget your password.
Please note messages on the screen when operation.
Touch this button to change password of the system. Input
LIVE 16XL
ENGLISH VERSION
an old password and a new password. The system will save
the new one as current password. Please note messages on
the screen when operation.
p. 45