Audiolab LIVE 16XL Manual De Usuario página 34

DSP Control
The Gate grid shows level setting of threshold in real time.
Meter on the left indicates the input signal's level activity.
Touch anyone of these controls to enter corresponding page.
It is the same with that in Assign interface in section 6.3.
Note: you can also rename the selected channel by long press-
ing CHXX.
6.6 COMP interface
LIVE 16XL
ENGLISH VERSION
Touch the switch in this window, you can engage and disen-
gage the Compressor for the selected channel. It will illumi-
nate to indicate that the compressor has been pressed and
enabled. The LCD display shows the compressor setting in
real time. Its parameters can change by rotating the Parame-
ter Adjust to set the value of Gain, Threshold, Attack, Release
& Ratio control directly or using up & left & down & right key
to choose the function that you want to modify. Please notice
that only if the Compressor button has been enabled can its
parameters be adjusted.
The bar has 3 colors here, which indicate 3 status.
• Grey- the switch is OFF.
• Green- the switch is ON, there is signal input and under
compressing, which means it enables the compressor
function.
• Red- the switch is ON, but compressor function not enable.
p. 34