Yamaha DSP-A1 Manual De Instrucciones página 65

1
Tape deck keys
Control tape deck.
G
(The A/B/C switch ( ) should be set to the "A" position.)
* DIR A, B and A/B are applicable only to double
cassette tape deck.
* For a single cassette deck with automatic reverse
function, pressing DIR A will reverse the direction of
tape running.
2
CD/LD player keys
Control compact disc player or LD player.
(To control compact disc player, set the A/B/C switch (
the "A" position. To control LD player, set the A/B/C switch
G
( ) to the "B" position.)
* DISC is applicable only to compact disc changer.
* STOP is applicable only to LD player.
3
Tuner keys
Control tuner.
G
(The A/B/C switch ( ) should be set to the "A" position.)
+: Selects higher preset station number.
–: Selects lower preset station number.
A/B/C/D/E: Selects the group (A – E) of preset station
numbers.
4
DSP program selector keys
Select a DSP program when the built-in digital sound field
processor (including the Dolby Pro Logic Surround decoder,
the Dolby Digital (AC-3) decoder and the DTS decoder) is on.
5
LEVEL key
When you will adjust output level of the center speaker(s), rear
speakers, front effect speakers or subwoofer, first press this
key once or more so that the name of speaker(s) whose level
you want to adjust appears on the display. While the name is
illuminated on the display, you can change the level by
D
pressing the + or – keys (
6
PARAMETER/SET MENU switch
Set to the PARAMETER position when you edit a parameter of
a DSP program. Set to the SET MENU position when you will
make an adjustment or setting change on a function in the SET
MENU mode.
7
TEST key
Used for speaker balance adjustment. (For details, refer to
pages 29 to 31.)
8
SLEEP timer key
This key is used to turn the built-in SLEEP timer on and off,
and to set the SLEEP time. (For details, refer to page 61.)
9
ON SCREEN display key
Changes the type of display showing the program name and
parameters, or information for various setting changes and
adjustments on the connected monitor's screen.
Whenever pressed, the screen changes to a full display, a
simple display and no display in turn.
0
SYSTEM POWER ON and STANDBY keys
Pressing the SYSTEM POWER ON key turns the power to this
unit on and pressing the STANDBY key turns this unit into the
standby mode.
G
)
A
RESET button
This button is inside the battery compartment.
Press this button to "reset" the internal microcomputer which
controls remote control operations. Microcomputer "reset" is
necessary when the remote control freezes.
* Pressing the RESET button will not erase learned
functions.
) to
B
MASTER VOLUME
Turn the volume level up and down.
C
MUTE key
When pressed, this key mutes the volume level. To resume the
original volume level, press this key again.
While muting, the indicator on the VOLUME control flashes
continuously.
D
/ and –/+ keys
(up) and
in the mode selected by the PARAMETER/SET MENU switch.
– and + keys make an adjustment or setting change on the
parameter (or function) selected by the
E
EFFECT ON/OFF key
Switches on/off the digital sound field processor (including the
Dolby Pro Logic Surround decoder, the Dolby Digital (AC-3)
decoder and the DTS decoder).
F
A/B/C indicators
The position (A, B or C) selected by the A/B/C switch is shown
in red.
G
A/B/C switch
This switch must be used only when the lid of the remote
control transmitter is open. (This switch will not function when
the lid is closed.)
Normally, set this switch to the "A" position. When controlling a
Yamaha LD player by using the CD/LD player keys (
this switch to the "B" position.
H
Input selector keys
Select input source. The TAPE 2 MON key differs from other
input selector keys in function. It is identical with the TAPE 2
MON/EXT. DECODER button on the front panel. Refer to page
23 for details.
I
TRANSMIT/LEARN indicator
Lights up when the remote control transmitter is transmitting
infrared signals (when a command key is pressed).
J
LIGHT key
If this key is pressed, some of the keys on the remote control
unit light up for about 5 seconds. If this key is pressed while
those keys are lighting up, they stop lighting.
Note
When using the keys to control Yamaha components,
identify them with your component's keys. If these keys
are identical, their functions will be the same. For each key
function, refer to the corresponding instruction in your
component's manual.
RESET button
(up) and (down) keys
(down) keys change parameters (or functions)
or key.
2
), set
63