Cutting Equipment; Technical Data - Husqvarna K6500 Manual De Instrucciones

Technical data

Technical data
Motor
Electric motor
Max. speed of output shaft, rpm
3-phase operation, Motor output - max. kW
1-phase operation, Motor output - max. kW
Weight
Machine with cable packadge, without blade, kg
Water cooling
Water cooling of blade
Recommended water pressure, bar
Min. recommended water flow, l/min
Connecting nipple
Noise emissions (see note 1)
Sound power level, measured dB (A)
Sound power level, guaranteed dB(A)
Sound levels (see note 2)
Sound pressure level at the operators ear, dB(A)
Equivalent vibration levels, a
2
Front handle, m/s
2
Rear handle, m/s
Note 1: Noise emissions in the environment measured as sound power (L
Note 2: Noise pressure level according to EN 60745-1. Reported data for noise pressure level has a typical statistical
dispersion (standard deviation) of 1.0 dB(A).
Note 3: Equivalent vibration level, according to EN ISO 19432, is calculated as the time-weighted energy total for
vibration levels under various working conditions. Reported data for vibration level has a typical statistical dispersion
(standard deviation) of 1,5 m/s

Cutting equipment

Cutting blade, mm
Max. peripheral speed, m/s
Max. blade speed, rpm
Max cutting depth, mm
TECHNICAL DATA
(see note 3)
hveq
2
.
K6500
HF High Frequency
4200
5,5
3
10.0
Yes
0,5-8
0,5 at water temperature 15°C
Type "Gardena"
110
111
99
3.0
3.0
) conforming to EN 60745-1.
WA
400
100
4200
145
English – 23