Dear Customer,
Thank you for choosing a Husqvarna product!
It is our wish that you will be satisfied with your product
and that it will be your companion for a long time. A
purchase of one of our products gives you access to
professional help with repairs and services. If the retailer
who sells your machine is not one of our authorised
dealers, ask him for the address of your nearest service
workshop.
This operator's manual is a valuable document. Make
sure it is always at hand at the work place. By following its
content (using, service, maintenance etc) the life span
and the second-hand value of the machine can be
extended. If you will sell this machine, make sure that the
buyer will get the operator´s manual.
More than 300 years of innovation
Husqvarna AB is a Swedish company based on a tradition
that dates back to 1689, when the Swedish King Charles
XI ordered the construction of a factory for production of
muskets. At that time, the foundation was already laid for
the engineering skills behind the development of some of
the world's leading products in areas such as hunting
weapons, bicycles, motorcycles, domestic appliances,
sewing machines and outdoor products.
Husqvarna is the global leader in outdoor power products
for forestry, park maintenance and lawn and garden care,
as well as cutting equipment and diamond tools for the
construction and stone industries.
Owner responsibility
It is the owner's/employer's responsibility that the operator
has sufficient knowledge about how to use the machine
safely. Supervisors and operators must have read and
understood the Operator's Manual. They must be aware
of:
•
The machine's safety instructions.
•
The machine's range of applications and limitations.
•
How the machine is to be used and maintained.
National legislation could regulate the use of this
machine. Find out what legislation is applicable in the
place where you work before you start using the machine.
The manufacturer's reservation
Subsequent to publishing this manual Husqvarna may
issue additional information for safe operation of this
product. It is the owner's duty to keep up with the safest
methods of operation.
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify
the design and appearance of products without prior
notice.
4 – English
PRESENTATION
Design and features
This is a product included in a range of high frequency
powered equipment for cutting, drilling and wall sawing.
They are designed to cut hard materials like masonry or
steel and should not be used for any purpose not
described in this manual.
Values such as high performance, reliability, innovative
technology, advanced technical solutions and
environmental considerations distinguish Husqvarna's
products. Safe operation of this product requires the
operator to read this manual carefully. Ask your dealer or
Husqvarna should you need more information.
Some of the unique features of your product are
described below.
K6500
•
The unit gives high power output and can use both 1-
and 3-phase input, which makes it flexible and usable.
•
Water cooling can be set in two modes on the
machine, wet cutting and dry cutting.
•
Elgard™ is an electronic overload protection that
protects the motor. The protection spares the machine
and extends its service life. With the help of Elgard™,
the machine indicates when it approaches maximum
load.
The load indicator shows the user that the correct load
level is being used for the cutting process and gives a
warning if the system is about to overheat.
•
Efficient vibration dampers spare arms and hands.
•
The design is lightweight, compact and ergonomic
which makes the unit easy to transport.