Inspecting And Replacing Anode - Yamaha 9.9F Manual Del Propietário

5) With the outboard motor in an verti-
cal position, using a flexible or pres-
surized
hypoid gear oil (SAE 90) into the oil
drain plug hole.
Gear oil capacity:
Refer to "SPECIFICATIONS", page 4-1.
6) When the oil begins to flow out of the
601015
oil level plug hole, insert and tighten
the oil level plug.
7) Insert and tighten the oil drain plug.
EML24010
INSPECTING AND REPLACING
ANODE
Yamaha outboard motor is protected
from corrosion by a sacrificial anode.
Check the anode periodically. Remove the
scales from surfaces of the anode.
For the replacement of the anode, consult
a Yamaha dealer.
cC
Do not paint the anode, for this would
render it ineffective.
604011
4-23
filling device, inject
GB
the