Stihl FC 100 Manual De Instrucciones página 22

Symbol on slide control
: c (7) – stop symbol and arrow. To
stop the engine, move the slide
control in direction of arrow ( h ) to
STOP-O
Starting
: Hold down the throttle trigger
interlock and squeeze the throttle
trigger.
: While holding both levers in this
position.
: Move the slide control to START
and hold it there.
Now release the throttle trigger, slide
control and trigger interlock in that order.
This is the starting throttle position.
FC 100
9
8
: Set the choke knob (8):
g
For cold start to
For warm start to e
even if engine has been running but
is still cold
: Press fuel pump bulb (9) at least five
times – even if the bulb is already
filled with fuel.
English / USA
: Place the unit on the ground: It must
rest securely on the engine support
and deflector.
Check that the cutting tool is not
touching the ground or any other
obstacles.
: Make sure you have a firm footing.
: Hold the unit with your left hand and
press it down firmly – your thumb
should be under the fan housing.
Do not stand or kneel on the drive
tube!
21