John Bean B 1200P Manual De Operador página 124

8
A
8
8
8
124
5-82
5-83
5-84
5-84b
5-85
Operation
Fig. 5-82 MINIMISATION "7", outside
— Rotate the wheel into marking position following the
arrows.
— In this position provide a double mark on the tyre
outer side exactly perpendicular to and above the
main shaft.
— Confi rm by pressing key 8.
The MINIMISATION "8" screen (Fig. 5-84) is displayed.
Fig. 5-83 MINIMISATION "7", inside
If the tyre cannot be turned over on the rim (e.g.:
Asymmetrical and Directional),
— press key (A, Fig. 5-83), then
— continue as shown on screen MINIMISATION
"7" outside (Fig. 5-82).
If the wheel can be turned over on the rim;
— Rotate the wheel into marking position following the
arrows.
— In this position provide a double mark on the tyre,
on the inside of the wheel, exactly above the main
shaft.
— Turn over the tyre on the rim (tyre changer).
— Confi rm by pressing key 8.
The MINIMISATION "8" screen (Fig. 5-84b) is
displayed.
Fig. 5-84b MINIMISATION "8"
— Readjust the tyre on the rim such that the double
mark coincides with the valve (use tyre changer).
— Confi rm by pressing key 8.
The MINIMISATION "9" screen (Fig. 5-85) is displayed.