John Bean B 1200P Manual De Operador página 86

S
86
4-11
4-12
Operation "MANUAL MODE"
5.10.3 Wheel Profi les function
(in MANUAL MODE only)
To balance more than one wheel of the same type and
with the same nominal dimensions, simply set the data
for the fi rst wheel only. The data set then remains until
other new data is set or the machine is switched off.
Fig. 4-11 PROFILE
To make the wheel parameters available permanently
use the WHEEL PROFILES function.
The wheel profi les function enables you to memorize
the values of certain wheel types that are often
balanced in the garage. Naturally this bypasses the
task of repeatedly setting wheel data. This function is
particularly useful for workshops that carry out series
fi tting of tyre/rim assemblies or frequently handle the
same wheel types (e.g. workshops that offer rims for
retrofi tting).
The once–only storage of the rim data in the profi les
guarantees that the same correction planes are always
used, in particular for alloy wheels, thus providing
consistent balance quality.
The function can be used to save the following data:
– Nominal wheel dimensions
– Values measured
– Position of weights (Modo Alu)
– Type of Vehicle
– Traceability positions (list from 1 to 9)
– Number of spokes (if loaded previously)
How to access
:
The WHEEL PROFILES menu can be accessed at
any time.
In the ENTERING WHEEL DATA menu (Fig. 4-12),
— Press the "SPECIAL" key (S, Fig. 5-43).
The WHEEL PROFILES screen is displayed (Fig. 4-11)