John Bean B 1200P Manual De Operador página 48

48
5-8
Operation
— Lift the pedal (Fig. 5-8).
— Check that the wheel is securely clamped by the
clamping adapter before the measuring run.
Warnings:
If during clamping the pedal is operated a second time,
clamping is interrupted and the clamping jaws return
to the home position.
The ESC, STOP and Electromechanical STOP keys,
if pressed during Power Clamp operation, also interrupt
clamping.
The measuring run can only be carried out if the wheel
is correctly clamped and the wheel guard is closed.
5.2.2 Unclamping the wheel
Note:
While the jaws unclamp, support the wheel WITH
YOUR LEFT HAND so that it will not tilt when
unclamped.
— Lift the pedal (Fig. 5-8).
— Remove the clamping sleeve from the shaft.
— Remove the wheel.