Settings for the Display
[SCREEN SETUP]
Choose settings according to the TV to be
connected.
Select [SCREEN SETUP] in the Setup Display.
For details, see "Using the Setup Display"
(page 86).
The default settings are underlined.
x [TV TYPE]
Selects the aspect ratio of the connected TV (4:3
standard or wide).
[16:9]
[4:3 LETTER
BOX]
[4:3 PAN SCAN]
[16:9]
[4:3 LETTER BOX]
[4:3 PAN SCAN]
88
GB
SCREEN SETUP
TV TYPE:
YC
C
/RGB (HDMI):
B
R
SCREEN SAVER:
BACKGROUND:
JACKET PICTURE
BLACK LEVEL:
BLACK LEVEL
(COMPONENT OUT):
4:3 OUTPUT:
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
Select this when you connect a 4:3
screen TV. Displays a wide picture
with bands on the upper and lower
portions of the screen.
Select this when you connect a 4:3
screen TV. Automatically displays
the wide picture on the entire
screen and cuts off the portions
that do not fit.
Note
• Depending on the DVD, [4:3 LETTER BOX] may be
selected automatically instead of [4:3 PAN SCAN] or
vice versa.
x [YC
C
B
Selects the type of HDMI signal output from
HDMI OUT jack.
[YC
C
]
B
R
[RGB]
Note
• If the playback picture becomes distorted, set
16:9
[YC
C
B
R
YC
C
B
R
ON
• If the HDMI OUT jack is connected to equipment
with a DVI jack, [RGB] signals will be automatically
ON
OFF
output even when you select [YC
FULL
x [SCREEN SAVER]
The screen saver image appears on the TV
screen when you leave the system in pause or
stop mode for 15 minutes, or when you play back
a CD, DATA CD (MP3 audio), or DATA DVD
(MP3 audio) for more than 15 minutes. The
screen saver will help prevent your display device
from becoming damaged (ghosting). Press any
button (e.g., H button) to cancel the screen
saver.
[ON]
[OFF]
x [BACKGROUND]
Selects the background color or picture on the
TV screen in stop mode or while playing a CD,
DATA CD (MP3 audio), or DATA DVD (MP3
audio).
[JACKET
PICTURE]
[GRAPHICS]
[BLUE]
[BLACK]
/RGB (HDMI)]
R
Outputs YC
C
B
Outputs RGB signals.
] to [RGB].
Turns on the screen saver.
Turns off the screen saver.
The jacket picture (still picture)
appears, but only when the jacket
picture is already recorded on the
disc (CD-EXTRA, etc.). If the
disc does not contain a jacket
picture, the [GRAPHICS] picture
appears.
A preset picture stored in the
system appears.
The background color is blue.
The background color is black.
signals.
R
C
].
B
R