Enjoying Stb (Set Top Box) Digital Sound Or Digital Satellite Receiver Sound From The System; (Stb Synchro); Connecting The System; Setting [Stb Synchro] - Sony DAV-IS10 Manual De Instrucciones

Ocultar thumbs Ver también para DAV-IS10:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Enjoying STB (Set Top Box) Digital Sound or Digital
Satellite Receiver Sound from the System

(STB SYNCHRO)

You can enjoy digital sound and images of STB or a digital satellite receiver. Sound is output from the
speakers of this system. Images of STB or a digital satellite receiver are output from the TV by the
HDMI connection (HDMI 1 shown below). Follow the connections and settings.

Connecting the system

Connect the STB to the HDMI input jack of the TV with an HDMI cable (not supplied) (make sure to
connect from the smallest number).
By connecting as the following illustration, you can enjoy Multi Channel Broadcasted Audio from the
speakers of this system.
Note
• To enjoy STB sound, the TV must be equipped with 2 HDMI input jacks.
• The names of HDMI inputs in the following illustration are examples.
: Video signal flow
: Audio signal flow
To HDMI 2 (HDMI cable)
Rear of the control unit

Setting [STB SYNCHRO]

1
Press "/1.
2
Press
DISPLAY when the system is in stop mode.
3
Press X/x to select
4
Press X/x to select [CUSTOM], then press
5
Press X/x to select [CUSTOM SETUP], then press
Note
• In order to set the [STB SYNCHRO] function, first set [HDMI CONTROL] to [ON] (page 40).
TV
C
Digital coaxial cord or
digital optical cord
[SETUP], then press
.
To HDMI 1 (HDMI cable)
STB
.
.
continued
45
GB

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido