JVC GR-DV1 Manual De Instrucciones página 46

46
VCR/TV Connection
C
CAM STAND
1 CONNECT CAMCORDER TO TV OR
VCR
Connect as shown in the illustration.
2 ATTACH CAM STAND TO
CAMCORDER
Line up with ,
a
A
The CAM Stand has two sides. One side is
used to hold the camcorder upright and the
other side is used to hold the camcorder flat.
3 TURN ON POWER
Turn on the power to the camcorder and the
TV/VCR.
4 SELECT TV'S VIDEO MODE
Set the TV to the channel or mode appropriate
for video playback.
If Using A VCR . . . go to step 4 .
If not . . . go to step 5 .
5 CONNECT VCR OUTPUT TO TV
INPUT
Refer to your VCR's instruction manual.
B
c
b
a
A
with and with .
B b C c
PLAYBACK
Basic Connections (Cont.)
AV-OUT
DC-IN 6V
AUDIO and VIDEO cable
(ø3.5 DV TV or VCR)
To AUDIO
and VIDEO IN
connectors
6 START PLAYBACK
Slide the cover ( pg. 47) and press PLAY.
You can watch the scenes you recorded on the
TV.
7 END PLAYBACK
Press STOP and, if you're not going to
continue using the camcorder, set the Power
pDial to "OFF".
NOTES:
To choose whether or not the following displays
appear on the connected TV . . .
Date/Time, Time Code
..... set to "ON" or "OFF" in the Playback Menu
( pg. 49).
Playback Sound Mode Display
..... set the Power Dial to "REC", and set "ON
SCREEN" in the Date/Time Menu (
to "ON" or "OFF". Then set the Power Dial
back to "PLAY".
MIC
To AV OUT
pg. 30)