Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

64
Audio/Video cable (ø3.5 DV TV or VCR)
Cleaning The Camcorder
1
CLEAN EXTERIOR
Wipe gently with a soft cloth.
2
CLEAN LENS
Blow it with a blower brush, then wipe gently
with lens cleaning paper.
3
REMOVE POWER SUPPLY
Remove the battery pack or disconnect the AC
Power Adapter/Charger.
4
OPEN CASSETTE DOOR
There is no power to the camcorder, so the
cassette holder won't open.
5
PULL OUT VIEWFINDER
Pull out the viewfinder and slide its cover
open.
6
CLEAN VIEWFINDER
Remove dust using a blower brush.
BATTERY PACK
CASSETTE HOLDER
CAM STAND
7
8
Audio/Video Cable And CAM Stand
1
2

AFTER USE

CASSETTE DOOR
VIEWFINDER COVER
RESET VIEWFINDER
Close the viewfinder's cover and push the
viewfinder back in.
CLOSE CASSETTE DOOR
WRAP CABLE AROUND STAND
Position the plug of the Audio/Video cable
(ø3.5 DV TV or VCR) as shown in the
illustration, then wrap the cable around the
stand in the direction indicated.
CONFIRM PLUG POSITION
Make sure the white, red and yelow plugs are
positioned as shown in the illustration.

Publicidad

Tabla de contenido
loading

Tabla de contenido