Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Washing the motorcycle
1. Rinse the motorcycle thoroughly with cool
water to remove loose dirt.
2. Clean the motorcycle with a sponge or soft
cloth using cool water.
Avoid directing water at muffler outlets and
electrical parts.
3. Clean the plastic parts using a cloth or
sponge dampened with a solution of mild
detergent and water. Rub the soiled area,
gently rinsing it frequently with fresh water.
Take care to keep brake fluid or chemical
solvents off the motorcycle.
They will damage the plastic and painted
surfaces.
The inside of the headlight lens may be
clouded immediately after washing the
motorcycle. Moisture condensation inside the
headlight lens will disappear gradually by
lighting the headlight in high beam. Run the
engine while keeping the headlight on.
4. After
cleaning
rinse
thoroughly with plenty of clean water.
Strong detergent residue can corrode alloy
parts.
5. Dry the motorcycle, start the engine, and
let it run for several minutes.
6. Test
the
brakes
motorcycle. Several applications may be
necessary to restore normal braking
performance.
7. Lubricate the drive chain immediately after
washing and drying the motorcycle.
Braking efficiency may be temporarily
impaired immediately after washing the
motorcycle.
Anticipate longer stopping distance to avoid a
possible accident.
the
motorcycle
before
riding
the
125
Publicidad
Tabla de contenido
