Pre-Ride Inspection - Honda CBF1000/A Manual Del Propietário

OPERATION

PRE-RIDE INSPECTION

For your safety, it is very important to take a
few moments before each ride to walk around
your motorcycle and check its condition. If
you detect any problem; be sure you take
care of it, or have it corrected by your Honda
dealer.
n WARNING
Improperly maintaining this motorcycle or
failing to correct a problem before riding
can cause a crash in which you can be
seriously hurt or killed.
Always perform a pre-ride inspection
before every ride
problems.
58
and correct any
1. Engine oil level - add engine oil if required
(page 31). Check for leaks.
2. Fuel level - fill fuel tank when necessary
(page 28). Check for leaks.
3. Coolant level - add coolant if required.
Check for leaks (pages 27).
4. Front and rear brakes check operation;
make sure there is no brake fluid leakage
(pages 21-23).
5. Tyres - check condition and pressure
(page 32-37).
6. Drive chain - check condition and slack
(page 92).
Adjust and lubricate if necessary.
7. Throttle - check for smooth opening and
full closing in all steering positions.