Major Components - Honda CBF1000/A Manual Del Propietário

MAJOR COMPONENTS

SUSPENSION
The rear shock absorber (1) has 7 adjustment
positions for different
conditions.
Use a pin spanner (2) and extension bar (3) to
adjust the rear shock.
Position 1 and 2 are for light loads and
smooth road conditions. Positions 4 to 7
increase spring preload for a stiffer rear
suspension, and can be used when the
motorcycle is heavily loaded.
Standard position: 3
The rear shock absorber assembly includes a
damper unit that contains high pressure
nitrogen gas. Do not attempt to disassemble or
service the damper; it cannot be rebuilt and
must be replaced when worn out. Disposal
should only be done by your Honda dealer.
The instructions found in this owner's manual
are limited to adjustment of the shock assembly
only.
20
(Information you need to operate this motorcycle)
load or riding
(1) Shock absorber
(2) Pin spanner
(3) Extension bar
3
1 2
(1)
(3)
(2)
4
5 6
7