Honda CBF1000/A Manual Del Propietário página 59

SEAT
Removing the seat
To remove rear seat (1), insert the ignition key
in the seat lock (2) and turn it clockwise. Pull
the seat backwards and lift.
To remove the front seat (3), unscrew the two
socket screws (4), pull the seat backwards
and lift.
Fitting the seat
To install the front seat, insert the two front
extensions at the sides under the fuel tank
and the central protrusion in the location
under the frame cross member. Now fit the
two socket screws and tighten them fully.
To install the rear seat insert the two
protrusions in the locations in the rear
subframe and press the rear of the seat
downwards.
After installing, check that the seat is securely
locked in position.
50
(3)
(1) Rear seat
(2) Seat lock
(4)
(1)
(2)
(3) Front seat
(4) Socket screws