To Assemble The Shaft; To Disassemble The Shaft - Husqvarna 525DEPS Manual Del Usuario

To assemble the shaft

1. Turn the knob to loosen the coupling.
2. Push and hold the release button.
3. Carefully push the shaft into the coupling until you
hear a click. Make sure that the release button go
into the hole in the coupling.
1480 - 003 - 05.08.2020
4. Tighten the knob fully.

To disassemble the shaft

1. Turn the knob 3 turns or more to loosen the
coupling.
2. Push and hold the release button.
3. Hold tight to the end of the shaft segments that you
are to remove.
11