John Bean B340 Manual Do Operador página 16

16
1 2
3
4-3
4-4
Layout
4.1 The screen
Fig. 4-3 Screen with display fi elds.
1 Display fi eld.
2 Information fi eld.
3 Commands Field (Key pad).
The screen shows the set data, helpful information, all
measured data and possible Error codes.
Description of display fi elds
Each fi eld of the screen has a specifi c function.
1 Display fi eld
- Rim dimensions (editable).
- Balancing modes (editable).
- Unbalance value.
- List of Counters.
- C codes (User Codes).
- Help information.
2 Information fi eld
- Number of the installed program version.
- Measurements of the wheel being processed.
- Operating conditions icons.
- Error codes.
3 Commands Field
The pictographs illustrating basic and special functions
are located here.
Each key has an icon showing the specifi c function it
is used to retrieve.
Touch Screen
In the Touch Screen interface, in order to have a touch
response, you need to tap and release the area on the
screen with your fi nger (Fig. 4-4).
The operator can hear a confi rmation tone, whenever
their own touch performs an action connected with
icons, buttons, text or images on the screen.
Note:
For a regular operation keep the monitor
clean as indicated in the maintenance
chapter (
F
6.0).