Installing The Mattress Support Extension; Mattress Retainers - Invacare Medley Ergo Serie Manual Del Usuario

Invacare® Medley Ergo™
7. Push the side rail in both ends, all the way up until the upper
bar locks in the upper position.
8.
Retighten the screw under the lower side rail bar, in each corner
of the bed ends.
Before taking the bed into use; Make sure that the side rail
is properly locked with the screw and that the bars run
smoothly.
3.8 Installing the mattress support
extension
(optional)
10
1. Remove the foot bed end.
2. Insert both sides of the mattress support extension into the
frame and secure with nuts and bolts.
3. Reinstall the foot bed end.
4. Attach mattress deck extender to the mattress deck.

3.9 Mattress retainers

WARNING!
Risk of injury
If the mattress retainers are removed the mattress will
not follow the movement, when profiling the sections.
The mattress can slip sideways and cause the user to fall
out of the bed or get trapped in the bed.
– Always use mattress retainers and be careful to put
them back after any adjustments.
– Always use the original type of retainers.
– After assembly of mattress support all four mattress
retainers must point upwards.
1556305-F