Installing The Shifter Handle - Invacare Reliant 450 Manual Del Usuario

6. Place the pinch guard over the shaft extension of the actuator.
7. Align the holes of the boom assembly mounting bracket with the actuator holes, and insert the bolt. Secure with a nut.
Ensure the bolt is completely through the holes of the boom assembly mounting bracket and the actuator assembly.
The boom assembly will pivot easily if the mounting hardware is aligned properly when the boom assembly is secured
to the mast.
8. Plug the electrical connectors from the actuator to the bottom of the battery assembly.
9. Plug the hand control into the bottom of the battery assembly.
The bottom of the actuator assembly will already be assembled to the mast mounting bracket.

5.2 Installing the Shifter Handle

1. Remove the shifter handle from the packaging carton.
2. Align the shifter handle threads with the threaded opening in the base.
3. Turn the shifter handle clockwise and securely tighten into the base.
1078987-O
5 Assembly
Fig. 5-5
24