Hofmann geodyna 8250 Manual De Operador página 20

0
1
2
3
4 5
6
20
7a
7b
7c
8
7d
7e
7
4-5
Layout
4.1.2 Screen pages & Commands
The Display fi eld shows the main Operating Screen
Pages.
Each Screen Page contains basic commands, located
at the bottom in the Commands Field. Further com-
mands may be positioned in other parts of the screen,
with specifi c Screen Pages and operating phases.
Fig. 4-5 INTRO SCREEN
Basic screen / Main menu.
This is the initial Screen Page, activated immediately
after starting the machine. It can be reached from any
other Screen Page in the program using the HOME key.
Commands:
0 - BALANCE WITH RUN OUT key - For selecting
the automatic (complete) balancing program, machine
performs tyre run-out and possibly rim run-out.
1 - Balance - Selects the automatic (complete)
balancing program.
2 - Balance No Spokes - Selects the automatic
balancing program, excluding the spoke identifi cation
process.
3 - Manual Data Entry - Selects the manual balancing
program.
4 - HELP key - Selects HELP texts for the current
function.
5 - BALANCING key - Opens the BALANCING Screen
Page.
6 - VEHICLE key - Allows selections; MOTORCYCLE
(only Manual), TRUCK, SUV, CAR (
7 - SETTINGS key - Opens the Settings Menu.
7a- PRINT key - Generates a printout (If enabled)
7b- SETTINGS key - Opens the SETTINGS Screen
Page.
7c- CUSTOMER DATA ENTRY key - Opens the
Customer Data Entry Screen Page (
7d- USER CALIBRATION key - Starts User Calibration.
7e- COMPENSATION RUN key - Retrieves the
Compensation Run.
8 - START key - Measuring run start, provided that the
wheel guard is lowered in advance.
5.1.1).
F
7.6).
F