Hofmann geodyna 8250 Manual De Operador página 28

1 2
3
7
1 2
28
4 5
8 9
4-10
3 4
4-11
Layout
Fig. 4-10
Optimisation / Minimisation Screen.
Open with the OPT/MIN key (6, Fig. 4-7) when on the
Screen after a measuring run.
Commands available during the entire cycle:
1 - HELP key - Selects HELP texts relating to the
current function.
2 - BALANCING key - Opens the BALANCING Screen
Page.
3 - OPTIMISATION key - Starts the Optimisation cycle
4 - MINIMISATION key - Starts the Minimisation cycle.
6
5 - PRINT key - For printing
6 - ESC key -
- Returns you to BALANCING/MAIN MENU.
7 - CONTINUE PREVIOUS OPT/MIN key - Continues
the previously interrupted Optimisation/Minimisation
cycle.
8 - CONFIRM key - Confi rm / enter completed wheel
positioning, as required by the program.
9 - BACK key - Takes you back one step during
execution of the OPT/MIN program.
Fig. 4-11
Wheel Profi le Screen Page.
Open with the SPECIAL key (3, Fig. 4-6), before the
measuring run.
Commands:
1 - HELP key - Selects HELP texts relating to the
current function.
2 - BALANCING key - Opens the BALANCING Screen
Page.
3 - SAVE key - Saves to the memory the wheel data
present in the "Current" line below the list.
4 - RETRIEVE WHEEL DATA key - Retrieves and sets
wheel data from one of the "Profi le" items listed.
5 - ESC key -
- Returns you to the MAIN MENU.
- Exits C codes.
- Clears HELP texts and ERROR messages.
5
OPTIMISATION/MINIMISATION
WHEEL PROFILE