Getting Started; Step 1: Unpack; Step 2: Prepare The Remote Control - JVC UX-S77 Manual De Instrucciones

Step 1
:Unpack the package and
check the accessories.
Step 2
: Prepare the remote control.
Step 3
: Hook up the components such
as AM/FM antennas, speakers,
etc. (see pages 4 to 7).
Finally plug the AC power cord.
Now you can operate the System.

Getting Started

Step 1: Unpack

After unpacking, check to be sure that you have all the
following items. The number in parentheses indicates the
quantity of each piece supplied.
• FM antenna (1)
• AM loop antenna (1)
• Remote control (1)
• Composite video cord (1)
• Batteries (2)
• AC plug adaptor (1)
If any item is missing, consult your dealer immediately.

Step 2: Prepare the Remote Control

Insert the batteries into the remote control by matching the
polarity (+ and –) correctly.
1
2
3
R6(SUM-3)/AA(15F)
• DO NOT use an old battery together with a
new one.
• DO NOT use different types of batteries
together.
• DO NOT expose batteries to heat or flame.
• DO NOT leave the batteries in the battery
compartment when you are not going to use
the remote control for an extended period of
time. Otherwise, the remote control will be
damaged from battery leakage.
3