4. ASSEMBLY INSTRUCTIONS
29
1
2. Step
1.
Connect the computer cable (16) to the computer (9).
2.
Fasten the computer (9) to the computer support (29). Use 4 screws (12) (premounted
to the back of the computer).
3.
Fasten the slide rail (26) to the main device (1) using the upper and outer holes in
the slot and the second last holes in the slide rail (26). Fasten with 1 flat washer (6),
1 hex screw (20) and the nylon nut (52). Fasten tightly.
9
12
6
52
20
20
26
38