Troubleshooting; Chart Of Medical Device Symbols Used; Chart Of Electrical Symbols Used - Sunoptic Surgical Titan X300 Manual Del Operador

Ocultar thumbs Ver también para Titan X300:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 59
10.

TROUBLESHOOTING

Problem
The power indicator (refer
to 4.1) is not lit.
The power indicator is lit,
but Xenon lamp will not
ignite.
11.

CHART OF MEDICAL DEVICE SYMBOLS USED

12.

CHART OF ELECTRICAL SYMBOLS USED

LIT-217 Sunoptic Surgical
Rev. D
Solution
A. Check that the AC power cord is properly connected.
B. Check the circuit breakers. If necessary, reset.
C. Power input switch is in the off position
A. Check to make sure lamp cartridge is seated properly.
B. Check that the lamp door is secured.
C. Check hour meter; if lamp hours exceed the rated
lamp life, replace the lamp (refer to 8.1).
Manufacturer
Date of manufacture (YYYY-MM-DD)
"Authorized Representative" in the European
Community
Caution
Caution: Federal law restricts this device to
sale by or on the order of a licensed
healthcare practitioner
Consult Instructions for Use
CE mark
Not disposable in general waste,
Caution: Hot Surface
Caution: Dangerous Voltage
Product Safety Mark
Do not use if package is damaged
AC Current
Equipotentiality
Power on
Power off
®
Page 13 of 112
(English)

Publicidad

Tabla de contenido
loading

Tabla de contenido