Accu-Chek Aviva Manual Del Usuario página 43

You need the meter, a test strip, a lancing device with a drum loaded, and the clear cap from the kit.
1. To make sure the display is working
properly, turn off the meter, then
press and hold
complete display. All segments
should be clear and look exactly like
the picture. If any segments are
missing from the display, there may
be a problem with the meter. Call the
ACCU-CHEK Customer Care Service
Center at 1-800-858-8072.
2. Wash your hands and
to see the
3. Remove the black cap
the test site with
warm, soapy water
and dry thoroughly.
from the lancing device
by pulling it straight
off. It is not a twist cap.
The easiest way to do
this is to place your
thumb to the side of
the notch as seen in
the illustration.
4. Put the clear cap on by
lining up the notched
sections on the cap
and the lancing device.
41