6. Put the meter on a flat surface. Point the two
IR windows toward each other. They should be
1 to 4 inches apart.
7. Do not move the infrared cable (computer),
PDA, or meter during the transfer.
8. Follow the prompts on the software.
9. The software program may shut off the meter
automatically when the data transfer is
complete. Should this occur, follow the prompts on your screen.
70
Downloading data is not recommended for healthcare facilities since there is no
means to identify results by patient.
Notes:
• If the data did not transfer successfully, try again. If you still have problems, call the
ACCU-CHEK Customer Care Service Center at 1-800-858-8072.
• To make the most of the download feature, you must set the time and date in the meter
correctly.