Inserting A Lancet Drum - Accu-Chek Aviva Manual Del Usuario

Inserting a Lancet Drum

You must first load the drum into the lancing device to get it ready for use.
28
1. Remove the cap by pulling it straight off. It
is not a twist cap. The easiest way to do
this is to place your thumb to the side of
the notch as seen in the illustration.
2. Before you insert a drum, be sure that the
release button is not yellow, and that no
lancets are sticking out of the drum. Insert
a new drum, blue ring first, until it stops. It
clicks into place.