Ingeteam INGECON SUN STORAGE 1Play Manual De Instalacion Y Uso página 36

Ingeteam
2. Remove the caps from the quick connectors.
3. Insert the connectors respecting the polarities indicated on the lower connections plate of the unit.
4. Ensure the connections are firm. If you wish to remove the aerial connectors, use the specific tool to do
so.
If you wish to connect two pairs of inputs in the type B hardware, use the diverters supplied with the unit, as
indicated in the following figures.
36 ABH2013IQM01_C- Installation and Operation Manual
Connecting the PV array