Types Of Hardware; Optional Accessories; Emc Requirements; Acoustic Contamination - Ingeteam INGECON SUN STORAGE 1Play Manual De Instalacion Y Uso

Unit description

2.2. Types of hardware

In the INGECON SUN STORAGE 1Play there are two distinct types of hardware, type A and type B. Both have the
same functionalities, but the type of hardware must be identified in order to perform the connections.
An easy way of identifying it is checking the number of PV array inlets in the cabling entrances in the lower part of
the unit. Hardware type A has two pairs of inlets, and hardware type B has one pair.
Hardware type A, two pairs of inlets

2.3. Optional accessories

These units may include the following accessories:
• Communication card.
• INGECON SUN EMS Board.
• Kit DRM0 (Australian Standard AS4777.2).
Communication cards
There are three distinct options for communicating the units. For more information consult the corresponding
communication accessories manual available at www.ingeteam.com.
There are several ways to achieve this communication with these units:
• RS-485.
• Ethernet TCP.
• Wi-Fi TCP.
INGECON SUN EMS Board
The INGECON SUN EMS Board is a control and communication device used to manage the energy flows within self
consumption installations. This device is integrated inside the inverter.
DRM0 kit (Australian Standard AS4777.2)
The DRM0 kit is required to comply with Australian Standard AS4777.2, where an external device called DRED
controls the unit through this DRM0 card.
There are two versions of the hardware inverter, type A and type B. This kit does not have to be installed in
hardware type B, as it already includes it as standard. On the other hand, hardware type A requires this kit to be
installed in order to comply with Australian standards.

2.4. EMC requirements

INGECON SUN STORAGE 1Play units are equipped with the necessary filtering elements to comply with
EMC requirements for domestic applications in order to prevent disturbances in other equipment outside the
installation.

2.5. Acoustic contamination

The unit produces a slight buzz when in operation.
Do not place it on light supports which might amplify this buzz. The mounting surface must be firm and
appropriate for the weight of the unit.
ABH2013IQM01_C - Installation and Operation Manual
Hardware type B, one pairs of inlets
Ingeteam
EN
ES
FR
PT
13