Ingeteam
5. Preparation for installing the unit
When deciding the location of the unit and planning your installation, you must follow a set of guidelines based on
the specifications of the unit. This chapter summaries the guidelines and details the external elements needed for
correct operation of the unit.
5.1. Environment
•
These units can be installed indoors and outdoors.
•
Place the units in a place which is accessible for installation and maintenance work and which permits
use of the keyboard and the reading of the front indicator LEDs.
•
Avoid corrosive environments that may affect the proper operation of the inverter.
•
Never place any object on top of the unit.
•
Do not expose the inverters to direct sunlight.
•
Keep the following distances free of obstacles:
5.2. Environmental conditions
Environmental operating conditions indicated in the specifications table must be taken into account when choosing
the location of the unit.
18
50 cm
30 cm
30 cm
Preparation for installing the unit
30 cm
ABH2013IQM01_C- Installation and Operation Manual