Replacing The Starter Rope And Rewind Spring - Stihl FC 85 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English / USA
Replacing the Starter Rope
and Rewind Spring
1
2
1
3
Removing the Starter Cover
:
Take out the screws (1).
:
Remove the cable lug, if fitted.
:
Lift the starter cover (2) away from
the tank (3) and pull it out from
under the shroud (4).
26
4
5
1
Removing the Rope Rotor
:
Take out the screw (5).
:
Remove the rope rotor very
carefully.
The rewind spring is seated in the
rope rotor and may pop out and
uncoil if care is not taken.
The pieces of broken spring may be
under tension and fly apart
unexpectedly when you remove the
rope rotor. To help reduce the risk of
injury, wear face protection and
gloves.
7
Replacing the Starter Rope
:
Use a screwdriver to pry the cap (6)
out of the starter grip.
:
Remove remaining rope from the
rotor and grip, making sure the
ElastoStart sleeve is not pushed out
of the grip.
:
Tie a simple overhand knot in the
end of the new starter rope (see
Specifications) and then thread the
rope through the top of the grip and
the rope bush (7).
:
Refit the cap in the grip.
6
FC 85

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido