Replacing The Depth Wheel / Gearbox Wheel; Replacing The Skirt; Removing The Skirt - Stihl FC 85 Manual De Instrucciones

Replacing the Depth Wheel /
Gearbox Wheel
2
Depth wheel
Have worn wheel replaced by your
STIHL dealer.
The end of the thread on screw (1) is
caulked to ensure that the wingnut (2)
does not work loose and be lost.
A very high torque has to be applied
to remove the wingnut from the screw.
If the parts are then reassembled, the
captive function is no longer
guaranteed. In such a case have the
screw and wingnut replaced by your
STIHL dealer.
FC 85
1
Gearbox wheel
Have worn wheel replaced by your
STIHL dealer.
The wheel helps protect the
gearbox from wear. If the gearbox
wheel is worn, also check the wear
indicator and the gearbox for signs
of damage – see "Checking and
Replacing the Wear Indicator".
English / USA

Replacing the Skirt

2
1

Removing the skirt

: Loosen the screw (1) on the
clamp (2) and slide the clamp back
along the drive tube in the direction
of the engine.
3
3
:
Release screws (3) on arm (4) and
remove together with arm.
4
29