Using The Dynamic Range Expander (Dre) Functions; Using The 3Dyc And I-P Mode - Pioneer PDP-4270XA Manual De Instrucciones

Setting up
DNR
Eliminates video noise for clean crisp images. DNR stands for Digital Noise
Reduction.
Selections Off Deactivates DNR.
High Enhanced DNR
Mid Standard DNR
Low Moderate DNR
MPEG NR
Eliminates mosquito noise from video images when a DVD is played, resulting in
noise-free images.
Selections Off Deactivates MPEG NR.
High Enhanced MPEG NR
Mid Standard MPEG NR
Low Moderate MPEG NR
BNR
Helps reduce noise appearing in high-definition images. BNR stands for Block Noise
Reduction.
Selections Off Deactivates BNR
On Activates BNR
7 Press HOME MENU to exit the menu.

Using the Dynamic Range Expander (DRE) functions

1 Press HOME MENU.
2 Select "Picture" (/ then ENTER).
3 Select "Pro Adjust" (/ then ENTER).
4 Select "DRE" (/ then ENTER).
5 Select an item to be adjusted (/ then ENTER).
• You can select "Dynamic Contrast", "Black Level", "ACL", "Gamma"
or "Intelligent DRE".
6 Select the desired parameter (/ then ENTER).
Dynamic Contrast
Emphasizes the contrast on images so that the difference between brightness and
darkness becomes more distinct.
Selections Off Deactivates Dynamic Contrast.
High Enhanced Dynamic Contrast
Mid Standard Dynamic Contrast
Low Moderate Dynamic Contrast
Black Level
Emphasizes dark portion on images so that the difference between brightness and
darkness becomes more distinct.
Black Level
Selections Off Deactivates Black Level.
On Activates Black Level.
ACL
Performs such compensation that results in the optimum contrast characteristics
for images.
Selections Off Deactivates ACL.
On Activates ACL.
Gamma
Adjusts the gamma characteristics (image gradation characteristics).
Selections 1 Selects gamma characteristics 1.
2 Selects gamma characteristics 2.
3 Selects gamma characteristics 3.
Intelligent DRE
Optimizes image quality.
Selections Off Deactivates Intelligent DRE.
On Activates Intelligent DRE.
7 Press HOME MENU to exit the menu.

Using the 3DYC and I-P Mode

1 Press HOME MENU.
2 Select "Picture" (/ then ENTER).
3 Select "Pro Adjust" (/ then ENTER).
4 Select "Others" (/ then ENTER).
5 Select an item to be adjusted (/ then ENTER).
• You can select "3DYC" or "I-P Mode".
6 Select the desired parameter (/ then ENTER).
3DYC
Optimizes characteristics for separating brightness signals and colour signals. This
works for both video and still images.
Selections Off Deactivates 3DYC.
High Enhanced 3DYC
Mid Standard 3DYC
Low Moderate 3DYC
I-P Mode
Perform optimum conversion from interlace signals to progressive signals. This
works for both video and still images.
Selections 1 Optimum for video images
2 Standard setting
3 Optimum for still images
08
31
En