Selecting A Decoder Input Terminal; Labeling Tv Channels; Sorting Preset Tv Channels - Pioneer PDP-4270XA Manual De Instrucciones

Setting up

Selecting a decoder input terminal

If you have connected a decoder, select a decoder input terminal
(INPUT1).
1 Repeat steps 1 to 6 provided for "Setting up analogue TV
channels manually".
After selecting a channel (using Programme Entry), perform the
following steps:
2 Select "Decoder" (/).
3 Select "INPUT 1" (/).
Tuner NR
Child Lock
Decoder
4 Press HOME MENU to exit the menu.
Note
• With "Off" (factory default) selected, you cannot watch any images
from the decoder.

Labeling TV channels

You can name TV channels that you have set up, using up to five
characters. This may help you easily identify the channels during
selections.
1 Press HOME MENU.
2 Select "Setup" (/ then ENTER).
3 Select "Analogue TV Setup" (/ then ENTER).
The password entry screen appears. Enter your 4-digit password using
buttons 0 to 9.
4 Select "Label" (/ then ENTER).
5 Select "Programme Entry" (/).
6 Select a programme number (/).
You can select 1 through 99.
Label
Programme Entry
Label
7 Select "Label" (/ then ENTER).
The name entry screen appears.
8 Select the first character (/// then ENTER).
1 2 3 4 5 6
A B C D E F
K L M N O P
U V W X Y Z
& ' ( ) + -
On
Block
INPUT1
1
7 8 9 0
G H I J
Delete
Q R S T
Space
, . : ;
* / _ @ OK
• The cursor moves to the second character.
9 Repeat step 8 to enter up to five characters.
• To correct entered characters, select [] or [] on the screen,
and then press ENTER. The cursor moves to the preceding or
subsequent character.
• To delete the current character, select [Delete] on the screen, and
then press ENTER.
• To put a space for the current character, select [Space] on the
screen, and then press ENTER.
10 To complete the name entry, press / or / to select
[OK] on the screen, and then press ENTER.
11 Press HOME MENU to exit the menu.
Note
• The above procedure transfers and sets the selected channel
information to the connected recording equipment such as a VCR
or DVD/HDD recorder (DVR).

Sorting preset TV channels

Use the following procedure to change the sequence of the preset TV
programmes.
1 Press HOME MENU.
2 Select "Setup" (/ then ENTER).
3 Select "Analogue TV Setup" (/ then ENTER).
The password entry screen appears. Enter your 4-digit password using
buttons 0 to 9.
4 Select "Sort" (/ then ENTER).
The sort screen appears.
Sort
09
01 AAAAA 10
02 BBBBB 11
03 CCCCC 12
04 DDDDD 13
05 EEEEE 14
06 FFFFF 15
07 GGGGG 16
08 HHHHH 17
5 Select a channel to be shifted (/// then ENTER).
6 Select a new location (/// then ENTER).
Sorting is executed.
7 Press HOME MENU to exit the menu.
Note
• To change a page on the Sort screen in step 6, select / on the
screen with / to select a page, and then press ENTER.
• The above procedure transfers and sets only the shifted channel
information to recording equipment such as a VCR or DVD/HDD
recorder (DVR).
1/4
IIIII 18 RRRRR
JJJJJ 19 SSSSS
KKKKK 20 TTTTT
LLLLL 21 UUUUU
MMMMM 22 VVVVV
NNNNN 23 WWWWW
OOOOO 24 XXXXX
PPPPP 25 YYYYY
QQQQQ
08
27
En