Sound Adjustments; Focus; Front Surround; Sound - Pioneer PDP-4270XA Manual De Instrucciones

08 Setting up
7 Press HOME MENU to exit the menu.
Note
• For the 3DYC, the individual parameters are selectable only when:
– You have selected INPUT 1, 2, or 3 as the input source and "Video"
as the input signal type (see Selecting an input signal type on
page 34); or
– You have selected INPUT 4 as the input source and have not
connected a S-Video cable; or You have selected the analogue
tuner.
• The 3DYC setting is ineffective when SECAM, PAL60, or 4.43NTSC
signals are input.
• For the I-P Mode, the individual parameters are not selectable for
the following input signals: 480p, 720p@60 Hz, 576p,
720p@50 Hz, 1080p@24 Hz.

Sound adjustments

You can adjust the sound quality to your preference with the following
settings.
Adjust the sound to your preference for the chosen AV Selection
option. See AV Selection on page 28.
1 Press HOME MENU.
2 Select "Sound" (/ then ENTER).
3 Select an item to be adjusted (/).
4 Select the desired level (/).
Sound STANDARD
Treble
Bass

Balance

Reset

FOCUS

Front Surround

 button
Item
Treble
For weaker treble
Bass
For weaker bass
Balance
Shifts the audio balance to the
left
5 Press HOME MENU to exit the menu.
Note
• You cannot adjust the sound for listening with headphones.
• If you perform sound adjustments with headphones connected,
the new settings will become effective as soon as you disconnect
the headphones.
• To restore the factory defaults for all items, press / to select
"Reset" in step 3, and then press ENTER. A confirmation screen
appears. Press / to select "Yes", and then press ENTER.
32
En
2
0
0
Off
Off
 button
For stronger treble
For stronger bass
Shifts the audio balance to the
right

FOCUS

This shifts the apparent direction of the sound upward for more clearly
defined sound.
1 Press HOME MENU.
2 Select "Sound" (/ then ENTER).
3 Select "FOCUS" (/).
4 Select the desired parameter (/).
Sound STANDARD
Treble
Bass
Balance
Reset
FOCUS

Front Surround

FOCUS
Selections Off Deactivates FOCUS.
On Activates FOCUS.
5 Press HOME MENU to exit the menu.
Note
• You cannot set up the sound field for listening with headphones.
• If you set up the sound field with headphones connected, the new
setting will become effective as soon as you disconnect the
headphones.
• The effect of this function differs depending on signals.
Front Surround
This provides three-dimensional sound effects and/or deep, rich bass.
1 Press HOME MENU.
2 Select "Sound" (/ then ENTER).
3 Select "Front Surround" (/).
4 Select the desired parameter (/).
Front Surround
Selections Off Deactivates both SRS and TruBass
SRS Reproduces highly effective three-dimensional

sound.

TruBass Provides deep, rich bass using a new
(default) technology.
TruBass + SRS Provides both TruBass and SRS effects.
5 Press HOME MENU to exit the menu.
2
0
0
Off
Off